|
Hydroponic Nutrient Powder Kit for Leafy Greens and Herbs.
Makes Part A and Part B Stock Concentrate.
This nutrient is suitable for growing crops like Lettuce, Spinach, Chives, Parsley etc. Also great for Asian Greens like Bok Choy and Choy Sum.
1L Kit makes 1L part A and 1L part B = 200L nutrient water.
2L Kit makes 2L stock part A and 2L stock part B = 400L of nutrient water.
5L Kit makes 5L stock part A and 5L stock part B = 1000L of nutrient water.
10L Kit makes 10L stock part A and 10L stock part B = 2000L of nutrient water.
20L Kit makes 20L stock part A and 20L stock part B = 4000L of nutrient water.
50L Kit makes 50L stock part A and 50L stock part B = 10,000L of nutrient water.
This nutrient can be used in all types of growing systems with or without substrate and is compatible with all types of substrates including coco media, rockwool, perlite, vermiculite and clay.
Contains all major and minor nutrients like Nitrogen (as nitrate and ammonium), Phosphorus (as phosphate), Potassium (as oxide), Sulphur (as sulphate), Calcium, Magnesium, Iron (as EDTA and EDDHA), Molybdenum, Copper, Zinc, Manganese and Boron. 2 types of iron chelates ensure iron availability at wide a range of pH levels.
MIXING DIRECTIONS:
1L Kit - Dissolve Part A in 1L of warm water. In a separate container, dissolve Part B in 1L of warm water.
2L Kit - Dissolve Part A in 2L of warm water. In a separate container, dissolve Part B in 2L of warm water.
5L Kit - Dissolve Part A in 5L of warm water. In a separate container, dissolve Part B in 5L of warm water.
10L Kit - Dissolve Part A in 10L of warm water. In a separate container, dissolve Part B in 10L of warm water.
20L Kit - Dissolve Part A in 20L of warm water. In a separate container, dissolve Part B in 20L of warm water.
Allow to fully cool before using and store away from light.
USAGE DIRECTIONS:
Use at a rate of 5mL Part A and 5mL Part B per litre of water, or 1L Part A and 1L Part B per 200 litres of water for bigger systems.
When mixed as per directions, the final EC will be about 1.4 and pH about 6.7 depending on the mixing water being used.
Each 1mL Part A + 1mL Part B added per litre of nutrient will increase the EC by about 0.18 and decrease the pH by about 0.03.
IMPORTANT - Add Part A first, mix well then add Part B. The 2 parts must never be mixed in concentrated form or precipitation will occur. Some nutrients will become insoluble and fall out of solution.
Agitate the final mixture well to ensure even mixing of all the components.
Check the EC and adjust if needed. Once the target EC range has been reached, check the pH and adjust if required.
Start seedlings with lower EC and gradually increase the EC as the plants grow.
This product is made in Australia from high quality ingredients sourced from reputable brands.
|
